E60 error code
ACV HeatMaster 201 E60 error code – Parameter-reading error
What does ACV HeatMaster 201 combined boiler and water heater E60 mean?
ACV documents E60 for the HeatMaster 201 MCBA controller as: Parameter-reading error.
The code identifies the condition detected by the product; it does not always identify the failed component on its own. Confirm the full code and exact model before ordering parts or attempting a reset.
The ACV HeatMaster 201 combined boiler and water heater E60 error code indicates aCV documents E60 for the HeatMaster 201 MCBA controller as: Parameter-reading error. This guide explains what the code means, the symptoms and likely causes, the checks that are safe to make, and when to stop and arrange an authorised repair.
Symptoms you may notice
The HeatMaster display flashes E60. Burner operation may stop and the appliance may remain locked out until the underlying safety or control condition is resolved.
Common causes
The official ACV MCBA table associates E60 with parameter-reading error. Diagnosis depends on the boiler's pressure, water flow, ignition, fan, sensor, wiring, controller or display condition.
Before you start troubleshooting
Use the display, rating label or product menu to confirm the exact model. Similar-looking codes can have different meanings across product generations and regions.
- Record the complete code before switching the equipment off.
- Check only user-accessible controls, filters and external connections described in the manual.
- Do not open gas, refrigerant, combustion or electrical compartments.
Troubleshooting steps
Record E60. Check visible system pressure, the external electrical supply and user-accessible controls only where the HeatMaster instructions permit. Do not open the appliance.
Can you fix this error code yourself?
The safest next step depends on the exact model and the cause behind the code. External checks may help, but a returning fault needs professional diagnosis.
A successful reset is not proof that the underlying issue is fixed. If E60 reappears, note when it happens and give that information to the service engineer.
Reset instructions
Correct the cause before using RESET. If E60 returns after a permitted reset, do not continue resetting the HeatMaster; arrange qualified diagnosis.
Applicable products and models
HeatMaster 201 combined boiler and water heaterHeatMaster 201Manual 66412501 revision CWhen to contact a professional
Contact ACV support or a suitably qualified heating engineer when E60 persists, returns after RESET, affects safe combustion or requires internal testing, adjustment or replacement.
Frequently asked questions
What does ACV HeatMaster 201 combined boiler and water heater E60 mean?
ACV documents E60 for the HeatMaster 201 MCBA controller as: Parameter-reading error.
Can I fix ACV HeatMaster 201 combined boiler and water heater E60 myself?
Some external checks may be suitable for the user, but the result depends on the exact model and cause. Use the official manual and arrange service if the code returns.
Should I reset the product after code E60?
Correct the cause before using RESET. If E60 returns after a permitted reset, do not continue resetting the HeatMaster; arrange qualified diagnosis.
When should I arrange a repair?
Contact ACV support or a suitably qualified heating engineer when E60 persists, returns after RESET, affects safe combustion or requires internal testing, adjustment or replacement.