345 error code
ELCO TRIGON XXL 345 error code – Swimming-pool solar control element K18 unavailable
What does ELCO TRIGON XXL commercial condensing boiler 345 mean?
ELCO documents lockout code 345 for the TRIGON XXL as: Swimming-pool solar control element K18 unavailable.
The code identifies the condition detected by the product; it does not always identify the failed component on its own. Confirm the full code and exact model before ordering parts or attempting a reset.
The ELCO TRIGON XXL commercial condensing boiler 345 error code indicates eLCO documents lockout code 345 for the TRIGON XXL as: Swimming-pool solar control element K18 unavailable. This guide explains what the code means, the symptoms and likely causes, the checks that are safe to make, and when to stop and arrange an authorised repair.
Symptoms you may notice
The TRIGON XXL controller records code 345. The boiler, affected heating circuit or connected system function may stop or operate with restrictions.
Common causes
The official lockout list associates 345 with swimming-pool solar control element k18 unavailable. The root cause may involve configuration, addressing, a sensor, connected module, wiring or the named component.
Before you start troubleshooting
Use the display, rating label or product menu to confirm the exact model. Similar-looking codes can have different meanings across product generations and regions.
- Record the complete code before switching the equipment off.
- Check only user-accessible controls, filters and external connections described in the manual.
- Do not open gas, refrigerant, combustion or electrical compartments.
Troubleshooting steps
Record code 345, the exact TRIGON XXL model and the affected module or circuit. Compare the system configuration with the official ELCO installation manual. Internal diagnosis and commissioning-menu work must be completed by a qualified commercial-heating engineer.
Can you fix this error code yourself?
The safest next step depends on the exact model and the cause behind the code. External checks may help, but a returning fault needs professional diagnosis.
A successful reset is not proof that the underlying issue is fixed. If 345 reappears, note when it happens and give that information to the service engineer.
Reset instructions
Reset or acknowledge the lockout only as described in the ELCO operating instructions and only after the underlying condition has been corrected. Do not repeatedly reset a returning code.
Applicable products and models
TRIGON XXL commercial condensing boilerTRIGON XXL SE; TRIGON XXL ECO; TRIGON XXL EVOCurrent official installation manualWhen to contact a professional
Contact ELCO technical support or a qualified commercial-heating engineer when 345 persists, affects combustion or flue safety, or requires sensor, module, addressing or controller diagnosis.
Frequently asked questions
What does ELCO TRIGON XXL commercial condensing boiler 345 mean?
ELCO documents lockout code 345 for the TRIGON XXL as: Swimming-pool solar control element K18 unavailable.
Can I fix ELCO TRIGON XXL commercial condensing boiler 345 myself?
Some external checks may be suitable for the user, but the result depends on the exact model and cause. Use the official manual and arrange service if the code returns.
Should I reset the product after code 345?
Reset or acknowledge the lockout only as described in the ELCO operating instructions and only after the underlying condition has been corrected. Do not repeatedly reset a returning code.
When should I arrange a repair?
Contact ELCO technical support or a qualified commercial-heating engineer when 345 persists, affects combustion or flue safety, or requires sensor, module, addressing or controller diagnosis.