E.00.08 error code
E.00.08 – Remeha Quinta Ace 135/160 error code
What does Remeha Remeha Quinta Ace 135 and 160 wall-hung gas boilers E.00.08 mean?
Remeha documents E.00.08 as “Heat-exchanger temperature sensor open”. It is a lockout code on the Quinta Ace 135 and 160 HMI T-control platform.
The code identifies the condition detected by the product; it does not always identify the failed component on its own. Confirm the full code and exact model before ordering parts or attempting a reset.
The Remeha Remeha Quinta Ace 135 and 160 wall-hung gas boilers E.00.08 error code indicates remeha documents E.00.08 as “Heat-exchanger temperature sensor open”. It is a lockout code on the Quinta Ace 135 and 160 HMI T-control platform. This guide explains what the code means, the symptoms and likely causes, the checks that are safe to make, and when to stop and arrange an authorised repair.
Symptoms you may notice
The control panel displays E.00.08. The boiler is locked out and requires the cause to be corrected before a permitted manual reset.
Common causes
The controller detected a sensor, temperature, pressure, circulation or related wiring condition. The exact failed part cannot be confirmed from the display alone.
Before you start troubleshooting
Use the display, rating label or product menu to confirm the exact model. Similar-looking codes can have different meanings across product generations and regions.
- Record the complete code before switching the equipment off.
- Check only user-accessible controls, filters and external connections described in the manual.
- Do not open gas, refrigerant, combustion or electrical compartments.
Troubleshooting steps
Record the code and check only user-accessible system pressure and external valve settings. Sensor, circulation, pump, wiring and heat-exchanger checks require a qualified engineer.
Can you fix this error code yourself?
The safest next step depends on the exact model and the cause behind the code. External checks may help, but a returning fault needs professional diagnosis.
A successful reset is not proof that the underlying issue is fixed. If E.00.08 reappears, note when it happens and give that information to the service engineer.
Reset instructions
Use the control-panel reset only after the underlying cause has been addressed and only as described in the official manual. If the code returns, stop resetting and obtain professional help.
Applicable products and models
Remeha Quinta Ace 135 and 160 wall-hung gas boilersQuinta Ace 135; Quinta Ace 1602021 manual generationWhen to contact a professional
Contact Remeha technical support or a suitably qualified Gas Safe registered commercial heating engineer. Provide the full code, boiler model, serial number and recent operating history.
Frequently asked questions
What does Remeha Remeha Quinta Ace 135 and 160 wall-hung gas boilers E.00.08 mean?
Remeha documents E.00.08 as “Heat-exchanger temperature sensor open”. It is a lockout code on the Quinta Ace 135 and 160 HMI T-control platform.
Can I fix Remeha Remeha Quinta Ace 135 and 160 wall-hung gas boilers E.00.08 myself?
Some external checks may be suitable for the user, but the result depends on the exact model and cause. Use the official manual and arrange service if the code returns.
Should I reset the product after code E.00.08?
Use the control-panel reset only after the underlying cause has been addressed and only as described in the official manual. If the code returns, stop resetting and obtain professional help.
When should I arrange a repair?
Contact Remeha technical support or a suitably qualified Gas Safe registered commercial heating engineer. Provide the full code, boiler model, serial number and recent operating history.