BE error code
Stuck control key
What does Samsung Dishwasher BE mean?
One or more control-panel keys are detected as permanently pressed. Samsung uses BE to identify a control-button or panel condition on the affected dishwasher. The code is a diagnostic starting point rather than proof that one specific part has failed. Confirm the complete code, exact model number and region before using repair information or ordering components.
The code identifies the condition detected by the product; it does not always identify the failed component on its own. Confirm the full code and exact model before ordering parts or attempting a reset.
The Samsung Dishwasher BE error code indicates one or more control-panel keys are detected as permanently pressed. Samsung uses BE to identify a control-button or panel condition on the affected dishwasher. The code is a diagnostic starting point rather than proof that one specific part has failed. Confirm the complete code, exact model number and region before using repair information or ordering components. This guide explains what the code means, the symptoms and likely causes, the checks that are safe to make, and when to stop and arrange an authorised repair.
Symptoms you may notice
- The dishwasher displays BE and may interrupt its wash or drain programme.
- The programme may pause, fail to fill, wash poorly or leave water in the tub.
- Pumps or valves may run differently from a normal programme.
- The code may return at the same stage of each cycle.
- The precise behaviour can vary by model, software version and the point at which BE is detected.
Common causes
- Samsung Dishwasher BE is associated with the control-button or panel condition described in Samsung's guidance.
- A button may be held, obstructed or continuously detected as pressed.
- Residue, moisture or an accessory may be affecting the control surface.
- The control panel may not have completed its normal startup sequence.
- The keypad, wiring or electronic control may require service.
- The display code alone cannot confirm which cause applies; diagnosis should begin with the least invasive documented checks.
Before you start troubleshooting
Use the display, rating label or product menu to confirm the exact model. Similar-looking codes can have different meanings across product generations and regions.
- Record the complete code and the point in the cycle when it appeared.
- Check accessible water, drain, door and filter areas only when the appliance is safely isolated.
- Stop if there is leaking water, a burning smell or a repeatedly tripping electrical supply.
Troubleshooting steps
- Photograph or write down BE, the model number and what the dishwasher was doing when the code appeared.
- Read the Samsung guidance linked in the source field and check that it applies to the exact model and region.
- Remove anything touching the controls and release each user button gently.
- Dry the external control surface with the product safely switched off.
- Do not spray cleaner directly onto the panel or prise around the keys.
- Restart once after the surface is dry and arrange service if the code returns.
- If BE returns, stop repeating resets and arrange authorised diagnosis with the recorded details.
Can you fix this error code yourself?
The safest next step depends on the exact model and the cause behind the code. External checks may help, but a returning fault needs professional diagnosis.
A successful reset is not proof that the underlying issue is fixed. If BE reappears, note when it happens and give that information to the service engineer.
Reset instructions
End the programme only when it is safe to do so. Complete the relevant external checks, then use the model-specific cancellation or power-reset procedure once. A code that returns on the next programme needs further diagnosis. A reset can clear the display without correcting the cause, so confirm normal operation afterwards and retain a record of BE for the engineer.
Applicable products and models
DishwasherModel and region dependentWhen to contact a professional
Contact Samsung or an authorised service provider if BE returns after the documented external checks, appears with leakage, smoke, overheating, electrical tripping, unusual noise or loss of a safety-critical function. Professional diagnosis is also required whenever testing would involve internal wiring, refrigerant, gas, high-voltage, sealed-system or moving components. Provide the full code, model number, serial details, region and the stage of operation at which the fault occurs.
Frequently asked questions
What does Samsung Dishwasher BE mean?
One or more control-panel keys are detected as permanently pressed. Samsung uses BE to identify a control-button or panel condition on the affected dishwasher. The code is a diagnostic starting point rather than proof that one specific part has failed. Confirm the complete code, exact model number and region before using repair information or ordering components.
Can I fix Samsung Dishwasher BE myself?
Some external checks may be suitable for the user, but the result depends on the exact model and cause. Use the official manual and arrange service if the code returns.
Should I reset the product after code BE?
End the programme only when it is safe to do so. Complete the relevant external checks, then use the model-specific cancellation or power-reset procedure once. A code that returns on the next programme needs further diagnosis. A reset can clear the display without correcting the cause, so confirm normal operation afterwards and retain a record of BE for the engineer.
When should I arrange a repair?
Contact Samsung or an authorised service provider if BE returns after the documented external checks, appears with leakage, smoke, overheating, electrical tripping, unusual noise or loss of a safety-critical function. Professional diagnosis is also required whenever testing would involve internal wiring, refrigerant, gas, high-voltage, sealed-system or moving components. Provide the full code, model number, serial details, region and the stage of operation at which the fault occurs.